• Home
  • WD Black SN750 SSD

The WD Black SN750 SSD marked improvement over the first generation of WD SSDs, which couldn’t differentiate itself from the hundreds of other SSDs in the market. It has read speeds up to 3,470MB/s. Overall, the WD Black SN750 NVMe SSD keeps the configuration the same, but has a new heatsink, which seems to be a concern when paired with some motherboards. This WD SSD is available in capacities ranging from 250GB to 2TB. The how to install WD Black SN750 NVMe SSD, carry out the below given instructions

Wd_Black Sn750 Nvme Ssd

How to Install WD Black SN750 SSD?

Before starting the steps, we strongly recommend a professional desktop technician to help you. However, we are happy to help you. Make use of the steps given below to get your WD Black SN750 NVMe SSD installed.

  • Before installing the WD Black SN750 NVMe SSD on your motherboard, take a back up of your data to another storage device.
  • From your drive bay, remove any storage device connected to the motherboard.
  • Turn ON your computer and go to the BIOS settings window.
  • In the BIOS, go to Setup -> Boot.
  • Make sure that a PCIe device is set in the boot priority list.
  • Save the settings and exit the BIOS windows.
  • Power off your computer.
  • Find the M.2 slot on your motherboard. If you are not sure about the M.2 slot, then you can refer to the user manual of your computer’s motherboard.
  • Insert the WD Black SN750 NVMe SSD into the M.2 slot. While install WD Black SN750 NVMe SSD, the pin-side should go into the slot first.
  • Screw the WD SSD on the motherboard.
  • Now, turn on your computer and install the Windows OS. It is recommended to install the Windows 8.1 or Windows 10 OS for better performance.

Once the OS is installed, you can use your WD Black SN750 NVMe SSD on your computer.