Install WD Black SN750 NVME SSD 1TB - If you’re a passionate gamer and wish to improve your gaming performance or simply want to upgrade your PC to the next level for an extraordinary gaming experience, then you can use the WD Black SN750 NVME SSD 1 TB to do it. This SSD comes in different storage capacities starting from 250 GB to 2 TB, and its price range depends on the storage. The NAND technology of the drive helps you extend the storage capacity. Other features of this SSD are sleek heatsink design, sequential read (3100 MB/s), and write (1600MB/s) performance, and PCIe interface.You can purchase the WD Black SN750 NVME SSD 1TB directly from the WD store. Installing this SSD on a desktop computer is also easy to perform. To know-how in detail, carry out the following instructions.
First, get appropriate screwdrivers to open your computer and its motherboard.
Before starting the SSD installation, backup your data stored on the computer because there is a chance for data loss to occur during this process.
After taking the back up of your data, turn off your computer.
Disconnect all the external devices, including a storage device connected to the computer.
Open your computer’s CPU cover.
Now, locate and remove the existing storage device from your computer’s motherboard or in the drive bay(s).
Connect the computer to the power source and turn it on.
Now, access your computer’s motherboard BIOS. (Refer to your computer’s user manual to know how to access the motherboard BIOS).
On the BIOS access page, select and set your PC in the boot priority list.
Click the Save button followed by Exit.
Power down your desktop computer.
On your computer’s motherboard, locate the M.2 slot and insert the WD Black SN750 NVME SSD 1TB on it.
Mount the necessary screws on the motherboard.
Now, turn on your computer and perform the on-screen instructions to complete the installation.
If you need remote assistance to install WD Black SN750 NVME SSD 1TB, contact us.