• Home
  • Western Digital TV Live Plus

WD TV Live Plus Remote Not Working - How To Fix?

Your remote may not work properly if the IR receiver or other parts in it are damaged. If you are WD TV live Plus remote not working, consider the steps that are given below to fix the issue.

WD TV Live Plus Remote Not Working
  • Unplug the power cord from the TV and reconnect it after a few seconds. Then, turn on the TV.
  • If the remote is still not working, remove and reinsert the batteries.
  • Now, press any button on the remote and check if it is working.
  • Ensure that you have a clear path between your remote and WD TV.
  • If there any obstructions in-between, remove them. If there are any electronic devices in the path, remove them if possible.
  • Move closer to your TV and hold the remote by 3-inch distance and cover any extra light with your hand between the remote and TV.
  • The IR signals may interfere with your remote signals.
  • If you have an old floppy disk at your home, cut the writeable media inside it.
  • Now, paste it to the front of the receiver’s remote.
  • Use this procedure to fix WD TV Live Plus Remote not working.
  • The remote will start working after you have covered the receiver.
  • If the issue persists, try changing the batteries in the WD TV remote.
  • If you have any other spare remote, you can use them and check if it is the remote issue.
  • Sometimes, the media player may also have any problems.
  • Press the Reset button on the TV using a paperclip for about 1 second.
  • Now, turn on the TV after 10 minutes and check if your remote is working.
  • If your device is still under warranty, you can contact WD customer support and apply for a replacement.
  • If you having any further queries regarding to fix WD TV Live Plus Remote not working. Click the call button available on the screen.