• Home
  • Connect USB Device To WD TV

WD TV Live USB Port 3.0

  • Establish a connection between the WD TV Live streaming player and an AC power outlet using a power cable.
  • The media player will turn on automatically.
  • To establish WD tv live USB 3.0, perform the quick instructions provided below.
  • The media player has two USB ports at the rear side.
  • Connect the USB drive to any one of the USB ports and wait until the media player scans for the device.
  • By default, the scanning feature is enabled. If you want to disable the automatic scanning feature, carry out the following instructions.
  • Go to the Home screen and select the Setup option followed by the System option.
  • Choose the Media Library option and press the OK button.
  • Disable the automatic scanning by selecting the Off option followed by the OK option.
WD TV Live USB 3.0

Accessing Files On Connected USB Device:

  • On the home screen, select the media type you want to access and press the OK button to set up WD tv live USB 3.0.
  • The Select Content Source screen will open. Use the arrow buttons to select the Select Content Source option and then press the OK button.
  • Choose any one of the following options and press OK.
  • My Media Library
  • Local Storage
  • Media Server
  • Network Share
  • Online Service
  • Continue with the on-screen instructions to access the files.

Unlocking the WD USB device:

  • To access the contents on the USB device, it should be unlocked for the WD Tv Live media player.
  • Navigate to the Unlock your WD Drive screen, select the OK option using the right or left arrow button, and press the OK button.
  • Enter the USB drive access password, select the Submit option, and press OK.
  • This will unlock the USB drive for the WD TV Live media player.
  • Once done, the menu bar for the selected media will display on the screen.
  • Choose a filter option and press the OK button.
  • Choose the content that you wish to access using the navigation buttons and press the OK button. Now Your WD tv live USB 3.0 is configured successfully.